Gıda Işleme

Vertical Type Milk cooling Tank

(300lt - 2000lt capacity)

Construction

Special calibrated manuel scale with 3-4 % sensitive rate1.walled 2mm and 1 mm walled accuplated Ep type heat transfer plate. Isolated walled from AISI 304 S.S

• Tank body accuplated on whole chassis
• Product Outlet DN 50 Butterfly valve
• Designed according to 0 liquid discharging system
• Insulation material; high density polyurethane foam without CFC and isolation thickness 60 mm
• Spring cover system and Ø 250mm product inlet.
• 1 pce 0,24 Hp 30 rpm gearbox and stainless steel agitator.
• Agitator has designed according to milk structure protection.
• Capacities;300lt ,500lt,1000lt,1500lt,1850lt,and 2000lt.
• Welding; Argon Tig welding system applied
• Cooling evaparator (rolbont) has tested against 40 bar test pressure.

Cooling Group

Cooling compressor are accuplated on chassis Min.gas charge ability A 404 gas cooling. Cooling possibility in min.milk quantities.

• Milking refrigating time from 35°C to 4°C under 2,5 hours.
• Cooling Performance Class 2-A-II
• Drier, sight glass, expantion valve, selenoid valve,liquid protector and valves etc.
• which belongs to the compressor ere existed.

Electronic Control Pannel

Electrical Control system are working by electronic KROMEL cards and it'saccuplated special frame board.

• Working principle of tank, Milk Temperature are controlled by control panel.
• Phase protection regulator in order to prevent of voltage increasing and decreasing, mixing of phase
• When open the cover automatically gearbox system take off.
• Electrical system, Protection Grade IP 65 conforming to the European standards.

Options

• Digital Level Indicator %3-4 failure rate sensitivity.
• Possibilty of control milk quantity on the panel.
• Possibilty of check from mm or it's parameteres.

Horizontal Type Manual Washing Models

(2000 lt- 10000lt capacity)

Construction

Special calibrated manuel scale with %003-4 sensitive rate. 1.walled 2mm and 1 mm walled accuplated Ep type heat transfer plate. Isolated walled from AISI 304 S.S. Tank body accuplated on whole chassis.Product Outlet DN 50 Butterfly valve.

• Designed according to 0 liquid discharging system
• Insulation material; high density polyurethane foam without CFC and izolation thickness 60 mm
• Ø 400-500 menhole cover stainless steel and Ø100 mm product inlet
• 1 pce 0,34 Hp d/d gearbox and agitator.Agitator has designed according to milk structure protection (ın 6000lt-10000 Tank, 2 agitator are existed)
• 1 pces stainless steel ladder
• Capacities;2000lt - 10000 lt
• Ø76 air hole
• Welding;Argon Tig welding system applied
• Cooling evaparator (rolbont)has tested against 40 bar test pressure.

Cooling Group

Cooling compressor are accuplated on chassis. Min.gas charge ability. A404 gas cooling. Cooling possibility in min.milk quantities.

• Milking refrigating time from 35°C to 4°C under 2,5 hours.
• Cooling Performance Class 2/A II
• Drier, sight glass, expantion valve,selenoid valve, liquid protector and valves etc.which belongs to the compressor ere existed.

Electonic Control Panel

Electrical Control system are working by electronic KROMEL cards and it's accuplated stainless steel frame board. Working principle of Thank, Milk Temperature,Electronic Milk scale,Washing system,and menus are controlled by control panel.

• When become a failure on electrical system, cooling system can past into the manuel system.
• Extra electro -mecanic safety system which is adjusted to 1,5 and 2°C is existed in order to prevent of freezng of milk.
• Any breakdown of system,failure message is existed.
• Passibity to check of failures,washing temperatures ,electrical defects milk temperatures previous last 20 days.
• To prevent of shock voltage on multiple system compressor ,system has been start up by stage.
• Phese protection regulator in order to prevent of voltage increasing and decreasing, mixing of phase
• Internet outlets on the electronic control panel.